Summit International Canada
WALKING SURFACES
Protecting your surfaces during remodelling and construction will save you time and money. From protecting carpets to hardwoods, it is less expensive to protect than to replace or repair.
Protecting your surfaces during remodelling and construction will save you time and money. From protecting carpets to hardwoods, it is less expensive to protect than to replace or repair.
• Double-ply corrugated board with anti-abrasion inner liner
• Fast and Easy to install
• Simply drape and center over top of door
• Protects both sides of the door
• Allows door to be used, locked, during construction
• Re-usable
Stop dust and dirt from being tracked through your project, job, office, or garage with Pro Tect Tacky Mats. Thirty disposable sheets per mat capture dirt and dust from foot traffic before it reaches the interior. When the top sheet becomes soiled, simply peel it off. Two-way tape provides slip-resistant placement of the mat in your high traffic, hard surface areas. Since each sheet is individually numbered, you’ll always know when to re-order.
Pro Tect Tacky Mats are held in place with two-way tape that attaches the under-side to hard surfaces. Simply remove the protective film and press into place.
Item No. PTM-2-3624 (2) 30 Sheet Mats 36’ x 24’
Item No. PTM-4-2445 (4) 30 Sheet Mats 45’ x 24’
PTMM – Mat Mount for 3’ x 2’ sheets
Another industry standard, Pro Tect Runners are the right solution for field finished hardwood floor protection, hard tile and marble as well as resilient floors like linoleum. Designed for high-traffic areas and high-risk hardwood floor surfaces that need extra protection. The non-porous neutral brown fabric is attractive, absorbent, reusable and helps protect from moisture. This non-adhesive hardwood floor protection product is safe for your expensive polished surfaces due to its special slip-resistant backing. It’s the right choice for floor protection. It’s durable, reusable, safe and suitable for indoor or outdoor use.
Application Made Easy
Simply roll Pro Tect Runners out and cut to the desired length with a utility knife. No need to waste time with hold-down or seam tapes. It’s as simple as roll out and cut to length. Lays flat and stays in place, even on a hardwood floor.
2′ x 50′ roll. 100 Sq. Feet.
2′ x 100′ roll. 200 Sq. Feet
2′ x 150′ roll. 300 Sq. Feet.
3′ x 50′ roll. 150 Sq. Feet.
3′ x 100′ roll. 300 Sq. Feet.
–3′ x 150′ roll. 450 Sq. Feet.
4′ x 50′ roll. 200 Sq. Feet.
4′ x 100′ roll. 400 Sq. Feet.
4′ x 150′ roll. 600 Sq. Feet.
Windows 45 and Windows 180 are ideal window protection solutions for the everyday builder or remodeler. They are useful in eliminating the possibility of damaging, scratching, or staining of windows and other objects during construction. Both window protection products are ideal masking solutions for windows to protect against over sprays, mortar stains, muriatic acid and more. Prevent unfortunate accidents with our top of the line window protection. Our window protection products can also be used for guarding window frames, countertops, cabinets, glass, Lexan, as well as factory-applied shellacs, varnishes, and any other painted or polyurethane surface. PROTECT’s window protection is durable and easy to apply. Windows 45 and Windows 180 are held firmly in place with a pre-applied, water-based adhesive for up to 45 or 180 days, depending on your need. At PROTECT our window protection products are designed and manufactured for the temporary protection.
3 mil. Self-adhering polyethylene stays in place to protect your windows, window frames, and glass from overspray, mortar stains, muriatic acid, and more. The film allows light in, making it easier to work in the room while protecting your windows. Safe to leave on for 365 days.
PT365-24-200 – 24” x 200’
PT365-36-200 – 36” x 200’
PW24-200 24″ x 200′ roll, 400 s.f. 6 lbs.
PW24-500 24″ X 500′ roll, 1000 s.f. 13 lbs.
PW36-200 36″ x 200′ roll, 600 s.f. 10 lbs.
PW36-500 36″ X 200′ roll, 600 s.f. 18 lbs.
PWD-1 Multi-size 24″, 36″ dispenser 8 lbs.
PW180-24 24″ x 500′ roll, 1000 s.f. 14 lbs.
PW180-36 36″ x 500′ roll, 1500 s.f. 20 lbs.
PWD-1 Multi-size 24″, 36″ dispenser 8 lbs.
This flexible answer to surface protection can be used on door thresholds, trim and hardware, plus window frames, fixtures and glass to prevent needless dirt, scratches and abrasions. Pro Tect Tape is a UV-treated, tough-skinned 6-mil. polyvinyl masking tape that will stand up to traffic and dirt. Pro Tect Tape even helps prevent water damage. This reflex blue colored tape features a pressure sensitive, rubber-based adhesive with an 18oz. tack that adheres to most clean, dry, and smooth surfaces.
Application Made Easy
Simply apply Pro Tect Tape as any other masking tape by pressing it in place as the roll is advanced. Cut to desired length with a utility knife. Stays in place, yet removes easily without adhesive residue.
Choose Your Size
(5 mil)
PT6B-2S 2″ x 108′ (36 yds.) one roll 1 lbs.
PT6B-3S 3″ x 108′ (36 yds.) one roll 1 lbs.
PT6B-4S 4″ x 108′ (36 yds.) one roll 1 lbs.
PT6B-6S 6″ x 108′ (36 yds.) one roll 1 lbs.
Choose Your Size
(5 mil)
PT5y2-200 2″ x 200′
PT5y3-200 3″ x 200′
PT5y4-200 4″ x 200′
PT5y6-200 6″ x 200′
PY5y12-200 12″ x 200′
PY5y24-200 24″ x 200′
PY5y36-200 36″ x 200′
This heavy duty contractor grade ductape designed with 10 times the shear strength and holding power of industry standard ductape. It adheres poly to walls securely and leaves no residue upon removal. Works great in tight spaces and is water and tear resistant. This product far surpasses the perfor- mance characteristics of other brands on the market.
Choose Your Size
PDT1-260 (1) 2″ x 180′ roll
This water resistant 3” tape is great for seaming together many of our flooring products especially Hardboard and Floor Guard. It’s high tensile strength and low temperature performance gives it excellent shear and holding power. Not suitable for taping to a finished floor.
Choose Your Size
CKST-134-04 (1) 3″ x 180′ roll
Keep your jobsite floors and counters safe from damage and debris! Neoprene Runner is the ultimate reusable surface protector for the professional. It rolls out flat and clings to floors and steps with a non-adhesive, slip resistant backing. Use Neoprene Runner to place tools and other items on in order to keep them clean and your floors protected.
27” x 12’ | 27” x 15’ | 27” x 180’
Roll Sizes
FL24-100 – 24” x 100’
FL36-100 – 36” x 100’
FL48-100 – 48” x 100’
Our premier floor protective roll. It is waterproof, breathable, non-slip, non-tear, and reusable. Made out of recycled PET fibers with a slightly adherent spray-on adhesive on the underside. Perfect for hardwood floors.
Floorotex Light (White) our budget-conscious surface Protective roll which is lighter in weight than Floorotex Blue and ideal for low traffic use.
Item No. | Description | Weight |
PTEX40-84 | 40“x84‘ roll, 280 ft | 9 Lbs. |
Item No. | Description | Weight |
PTEXLT40-84 | 40“x84‘ roll, 280 ft | 7 Lbs. |
Roll Info
PCM3-200 – 36” x 200’
PCM6-300 – 72’ x 300’ (Non Stock)
Pre-Taped Drape comes in three convenient sizes for protecting paneling, columns, wall treatments, bars, cabinets, counters, entertainment casework, furniture centers, replaces, mantles, mirrors, glass, stone, masonry, xtures, appliances, baseboards, and more…
The attached tape makes masking easy. Folded sheeting stays out of the way until the taping is done. Save time and money by protecting your finished surfaces from paint splatter and/or dust.
PDT024 1 Roll, 24” x 72’
PDT048 1 Roll, 48” x 72’
PDT072 1 Roll, 72” x 72’
PDT096 1 Roll, 96” x 72’
PDT120 1 Roll, 120” x 72’
PDT144 1 Roll, 144” x 72’
Pro Tect Quick Prop is the newest and best way to partition off a work-area. A quiet, clean way to erect a construction barrier. No more cutting, nailing, pounding, stapling and wasting expensive materials. Made from strong aluminum poles that can extend from 5’3” to 10′ feet high or 6’8″ to 16′ , Pro Tect Quick Prop can be used to support…
Item No. EZP-10-2 5’3” to 10’ E-Z Prop Poles (Set of 2)
Item No. EZP-16-2 6’8” to 16’ E-Z Prop Poles (Set of 2)
|
|
Application Made Easy
A.Pull out rivet from top suction pad and push pad onto the inner pole.
B.Pierce through edge of plastic screen with the rivet, securing it into the hole at the center of the suction pad.
C.Attach bottom suction pad to outer pole.
D.Release thumbscrew tension and extend pole, with screen attached to top until both suction pads are compressed between floor and ceiling. Tighten thumbscrew while firmly holding joint to maintain compression.
E.At each fold of plastic, clip surplus to plastic with the included clips.
Pro Tect ProVent Completely REUSABLE, simply clean PROVENT and move on to your next job.
• Keeps dirt, dust and debris from entering your duct work.
• No more going back after the job and having to spend time and money to clean them
• Fits over rough-in duct work, while allowing you to run air
Item No. PV-10 (10) 6” x 14” Vent Guard
Pro Tect’s Clip & Snap Fasteners – Pro Tect’s Clip & Snap Fasteners allow you to hang any mil poly from any commercial drop ceiling. Simply attach the top of the clip to the “t-bar” on the drop ceiling, push the poly over the pin and then attach the stopper. In just minutes you can eliminate damage, clean-up cost and save money. The New Clip and Snap Fasteners will help you keep things Dust and Damage free.
Item No. PTCSB-1
Pro Tect’s new Clip and Snap Fasteners (Red) allows you to hang your poly from any building component. It comes with a 10″ releasable cable tie that can be attached to poles, bars, wood, scaffolding or any other type of surface where you need to create a containment barrier. The New Clip and Snap Fasteners will help you keep things Dust and Damage free.
Item No. PTCSR-1
Item No. JP1-069 4.5”-9’ x 3.25” x 69”
FPB42-1 Cardboard Jamb Protector 4.5” – 7” x 42”
Corner Protectors Messy, time consuming corner damage is easily avoided with our reuseable heavy duty corner protection.
• Temporary protection for corners that keep getting damaged during remodeling or construction.
• Pro Tect Corner Guards are the perfect re-usable solution for protecting any 90 degree corner on the job.
• Protect furniture, walls and counter tops edges
• Made of heavy duty plastic, OSHA orange
Item No. PCCG-1 48” x 1.5” x 1.5”
R Floor Guard Protects hardwood, tile and concrete floors from water damage due to construction, reno’s and/or foot traffic.
WR Floor Guard is a 16 mil anti-slip extra thick, water resistant paper that acts like a shield, protecting your finished floors from water, mud, snow, paint, abrasion and impact. All while remaining vapour permeable.
Item No. AEFL40-120 16-mil 40”x 120’
o 2-mil. polyethylene film with slip-resistant protection for almost any factory finished surface.
o Protect finished surface from dirt, grime, and spills.
o Excellent for protecting tile, vinyl, counter-tops, appliances, or any factory finished surface.
o Protect floors from scuffs and abrasions.
o Reverse wound for easy application.
o 5 convenient builder sizes.
PMR24-200 – 24” x 200’
PMR24-500 – 24” x 500’
PMR36-200 – 36” x 200’
PMR36-500 – 36” x 500’
Hardboard is re-usable, temporary, and can be used to protect the wood, tile, marble, finished or un-finished concrete, countertops; any hard surface area. This heavy-duty, 50 mils thick flexible board, comes in 36″ x 100′ foot rolls, lays flat and can take a beating. Don’t spend all your time taping pieces of cardboard together; HardBoard allows you to cover the surface in half the time. Save time, save money, protect your hard surfaces with HardBoard.
PTHBWR36-100 – 36” x 100’ (46 mil.)
Shoe Booties are NOT your old cloth booties, these are new and improved